Con Lock

 

 Download PDF

 

The Specifics

 

The range consists of a pre-determined length of wirefrom 1metre to 10 metres with a choice of Safe Working Load:
 
  • G 10kg
  • S 50kg
  • Y 90kg
 
The system consists of wire and zip-clip with a CLA1 concrete
anchor termination.
 

 

 

The Applications
 
 
Suitable for concrete applications including:
 
  • Cracked concrete
  • Reinforced concrete
  • Slagged concrete
  • Hollow pot
 

 

                       

 

 

The Technical Information
 
  • Key free release system
  • No claw back required
  • Nail anchor for hammer set installation
  • The installed nail anchor expands automatically under load,pulls the cone into the expansion clip and expands against the wall of the concrete.
  • Can also be supplied with a double drop
  • Shallow embedment
  • ETA approved
  • BS8539 Compliant
  • High tensile galvanised wire 1960 N/mm² grade 7 x 7 construction
  • BSEN 12385 standard
 
 
The Installation
 
  • Drill a 6mm hole to a minimum depth of 30mm
  • Blow the hole clean of dust and debris
  • Hammer in the fixing
  • Anchor is now fixed, no claw back required
  • Pass the wire through the zip-clip in the direction of the arrow
  • Pass through or around your required suspension and back through the zip-clip leaving 15cm of wire protruding
  • Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated
                     

 

 

 Download PDF


 

 

 

 

Con Lock
Anchor It
Thread It
Plus On Wire
Shot Lock
 

 

Name*  
Email*  
Phone*  
Query*  
Code *  
 
 

Get informed about the latest products at our website...

Email: