Anchor It


 Download PDF



The Specifics
The range consists of a predetermined length of wire
from 1 metre to 10 metres with a choice of Safe Working
  • G 10kg SWL
  • S 35kg SWL
The system consists of wire and zip-clip with a ferruled
CLA2 concrete anchor termination



The Applications
Suitable for concrete applications including:
  • Solid brick
  • Compressive resistant stone
  • Reinforced concrete
  • Slagged concrete C15/C35



The Technical Information
  • Key free release system
  • Vibration resistant
  • Zinc plated pre-expanded through bolt
  • 30mm long
  • 5mm wide
  • 6mm head width
  • 30mm embedment depth
  • 5mm drill diameter required
  • High tensile galvanised wire 1960N/mm² grade 7 x 7 construction
  • BSEN 12385 standard



The Installation
  • Drill a 5mm hole to a minimum depth of 30mm
  • Blow the hole clean of dust and debris
  • Drive the anchor into the hole until the head is firmly seated against the base material. Be sure the anchor is driven to the required embedment depth.
  • Pass the wire through the zip-clip in the direction of the arrow
  • Pass through or around your required suspension and back through the zip-clip leaving 15cm of wire protruding.
  • Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated





 Download PDF





Con Lock
Anchor It
Thread It
Plus On Wire
Shot Lock


Code *  

Get informed about the latest products at our website...