Standard size 18” x 18” x 3/4” (450 x 450 x19mm) consists of 81 – 2” (50mm) modules. The 2” (50mm) squares are separated by a thin web that is easily cut to provide evenly dimensioned pads such as 2” x 2” (50 x50mm), 2” x 4” (50 x 100mm), 4” x 4” (100 x100mm), 6” x 8” (150 x 200 mm), etc. EFWP is one of the thickest, most versatile and efficient pads in the market.
Models :
- Natural Rubber for maximum resilience and vibration isolation. Contains anti-oxidants and anti-ozonants to improve aging.
- tandard Neoprene for longer life and moderate oil resistance.
Pads can be used to reduce noise, high frequency vibration and impact from typical machines as follows :
- Chillers
- HVAC Units
- Pumps
- Transformers
- Punch Presses
- Saws
- Drill Presses
- Compressors
- Vent Sets
- Motor Generators
- Diesel Generators
- Lathes
- Power Presses
CALCULATION
EFWP Pads should be used in full squares. Select the minimum number of squares required and design pad to the most convenient square or rectangle. The use of additional squares results in more conservative loading.
British Units Example-
Load is 980 lbs. 50 Duro capacity is 180 lbs. 980/180 = 5.44 squares (Use 6 square modules). Pad may be 2 modules x 3 modules (4” x 6”) or 1 module x 6 modules (2” x 12”)
Metric Units Example–
Load is 5000 kgs. 50 Duro capacity is 80kgs. 5000/80 = 62.5 squares (minimum). Pad may be 8 modules x 8 modules (400 x 400mm) or 7 modules x 10 modules (350 x 500mm) or 6 modules x 11 modules (300 x 550mm) etc.
